Unable to locate package raspberry

Unable to locate package raspberry

I have been trying to get this working for a lot of hours now but no success. Here is what I have done-

1. ping 8.8.8.8 works
2. Also added

i but hasn’t helped.

(any package basically)

Error it is giving

Re: Unable to locate package — Raspbian

I have been trying to get this working for a lot of hours now but no success. Here is what I have done-

1. ping 8.8.8.8 works
2. Also added

i but hasn’t helped.

(any package basically)

Error it is giving

You should be running the supported Raspbian Stretch and you should not need to change repositories.

Raspbian Wheezy is an ancient release and no longer supported.

You should only read Blogs / Tutorials which are 2018 and specifically for Raspbian Stretch, otherwise you will likely completely screw up Raspbian.

Re: Unable to locate package — Raspbian

Re: Unable to locate package — Raspbian

Re: Unable to locate package — Raspbian

Re: Unable to locate package — Raspbian

The implication is that if you’ve messed up^W^Wchanged your source.list file(s), then did update/upgrade/install stuff, then you’ve messed up your system by installing stuff that shouldn’t be there. More precisely, you’ve installed wrong versions of things (possibly wrong architectured stuff — perhaps x86 binaries).

Getting back the original sources.list file won’t make things right again. The damage has been done. The only way to get back to stable ground is to re-install everything.

«L’enfer, c’est les autres»

G fytc hsqr rum umpbq rm qyw rm rfc kmbq md rfgq dmpsk:

J lnacjrw njbruh-carppnanm vxm rb mnuncrwp vh yxbcb!

Re: Unable to locate package — Raspbian

Above for my current installation. It could be that the «mirrordirector.» is choosing mirrors that are incomplete. Why would they be complete when wheezy is out of stable by half a decade? Going closer to home «raspbian.» will likely be «better», but no guarantee of success. Debian tends towards «httpredir.», not sure if raspbian follows that methodology. Just a few things to try before going with a fresh install. A fresh install is likely the quickest «success» route open atm. Which you’ll need as a backup anyway to recover your current install when you hose it.

Personally I find raspbian annoying, and end up on debian at some point when I play with my raspberry pi’s. Not for the meek.

Источник

Unable to locate package raspberry

Can someone explain why I can’t install realvnc?

I’m following the Blog and Raspberry Documentation but nothing works.

I have done update (twice) and upgrade. and I still get the «Unable to locate package» error:

sudo apt-get install realvnc-vnc-server realvnc-vnc-viewer
Reading package lists. Done
Building dependency tree
Reading state information. Done
E: Unable to locate package realvnc-vnc-server
E: Unable to locate package realvnc-vnc-viewer

Info on my setup:-

uname -a
Linux raspberry 4.19.0-9-amd64 #1 SMP Debian 4.19.118-2+deb10u1 (2020-06-07) x86_64 GNU/Linux

cat /etc/os-release
PRETTY_NAME=»Debian GNU/Linux 10 (buster)»
NAME=»Debian GNU/Linux»
VERSION_ID=»10″
VERSION=»10 (buster)»
VERSION_CODENAME=buster
ID=debian
HOME_URL=»https://www.debian.org/»
SUPPORT_URL=»https://www.debian.org/support»
BUG_REPORT_URL=»https://bugs.debian.org/»

cat /etc/apt/sources.list
deb http://ftp.debian.org/debian/ buster main contrib non-free
deb http://security.debian.org/ buster/updates main contrib non-free
deb http://ftp.debian.org/debian/ buster-updates main contrib non-free

# Uncomment lines below then ‘apt-get update’ to enable ‘apt-get source’
#deb-src http://ftp.debian.org/debian/ buster main contrib non-free
#deb-src http://security.debian.org/ buster/updates main contrib non-free
#deb-src http://ftp.debian.org/debian/ buster-updates main contrib non-free

# This system was installed using small removable media
# (e.g. netinst, live or single CD). The matching «deb cdrom»
# entries were disabled at the end of the installation process.
# For information about how to configure apt package sources,
# see the sources.list(5) manual.

cat /etc/apt/sources.list.d/raspi.list
deb http://archive.raspberrypi.org/debian/ buster main
# Uncomment line below then ‘apt-get update’ to enable ‘apt-get source’
#deb-src http://archive.raspberrypi.org/debian/ buster main

Appreciate if someone could guide me on how to install the VNC Server.

Have also tried using GUI on Raspberry PI Configuration — > Interfaces, but the only option available is SSH.

Источник

Unable to locate package raspberry

On raspberry pi I am trying to install
iiod_0.7-1_armhf.deb
libiio-cil-dev_0.7-1_all.deb
libiio-dev_0.7-1_armhf.deb
libiio-utils_0.7-1_armhf.deb
libiio0-cil_0.7-1_armhf.deb
libiio0_0.7-1_armhf.deb
libiio_0.7-1.debian.tar.xz
python-libiio_0.7-1_all.deb

using terminal
pi@raspberrypi:

$ sudo apt-get install libiio0_0.7-1_armhf.deb
Reading package lists. Done
Building dependency tree
Reading state information. Done
E: Unable to locate package libiio0_0.7-1_armhf.deb
E: Couldn’t find any package by regex ‘libiio0_0.7-1_armhf.deb’

Do i have the mirror line definition in raspi.list wrong?
Should I be using a different procedure other than apt-get to install these?
Thank you.

Re: Unable to locate package

Re: Unable to locate package

Thank you for your quick response.
No, I did not run apt-get update first.
I have now run it with this output.

$ sudo apt-get update
Get:1 http://mirrordirector.raspbian.org jessie InRelease [14.9 kB]
Ign http://ftp.gnome.org jessie InRelease
Ign http://ftp.gnome.org jessie Release.gpg
Get:2 http://mirrordirector.raspbian.org jessie/main armhf Packages [8,981 kB]
Ign http://ftp.gnome.org jessie Release
Err http://ftp.gnome.org jessie/main armhf Packages
404 Not Found [IP: 2001:6b0:e:2018::173 80]
Ign http://ftp.gnome.org jessie/main Translation-en_GB
Ign http://ftp.gnome.org jessie/main Translation-en
Get:3 http://mirrordirector.raspbian.org jessie/contrib armhf Packages [37.5 kB]
Get:4 http://mirrordirector.raspbian.org jessie/non-free armhf Packages [70.3 kB]
Get:5 http://mirrordirector.raspbian.org jessie/rpi armhf Packages [1,356 B]
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
Ign http://mirrordirector.raspbian.org jessie/main Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
Fetched 9,105 kB in 34s (261 kB/s)
W: Failed to fetch http://ftp.gnome.org/mirror/cdimage/sna . f/Packages 404 Not Found [IP: 2001:6b0:e:2018::173 80]

E: Some index files failed to download. They have been ignored, or old ones used instead.

— above is the end of apt-get update —

But I got the same results again.
I tried several packages but I just listed one below.

$ sudo apt-get install libiio0_0.7-1_armhf.deb
Reading package lists. Done
Building dependency tree
Reading state information. Done
E: Unable to locate package libiio0_0.7-1_armhf.deb
E: Couldn’t find any package by regex ‘libiio0_0.7-1_armhf.deb’

Re: Unable to locate package

I found a new mirror

in file: /etc/apt/sources.list.d/raspi.list
change to new mirror:
deb https://mirror.its.sfu.ca/mirror/ubuntu . bi/libiio/ jessie main

in terminal update using new mirror:
pi@raspberrypi:

$ sudo apt-get update
Hit http://mirrordirector.raspbian.org jessie InRelease
Hit http://mirrordirector.raspbian.org jessie/main armhf Packages
Get:1 https://mirror.its.sfu.ca jessie InRelease [267 B]
Ign https://mirror.its.sfu.ca jessie InRelease
Get:2 https://mirror.its.sfu.ca jessie Release.gpg [269 B]
Ign https://mirror.its.sfu.ca jessie Release.gpg
Hit http://mirrordirector.raspbian.org jessie/contrib armhf Packages
Get:3 https://mirror.its.sfu.ca jessie Release [265 B]
Ign https://mirror.its.sfu.ca jessie Release
Hit http://mirrordirector.raspbian.org jessie/non-free armhf Packages
Get:4 https://mirror.its.sfu.ca jessie/main armhf Packages [288 B]
Hit http://mirrordirector.raspbian.org jessie/rpi armhf Packages
Get:5 https://mirror.its.sfu.ca jessie/main Translation-en_GB [289 B]
Get:6 https://mirror.its.sfu.ca jessie/main Translation-en [286 B]
Get:7 https://mirror.its.sfu.ca jessie/main armhf Packages [288 B]
Get:8 https://mirror.its.sfu.ca jessie/main Translation-en_GB [289 B]
Get:9 https://mirror.its.sfu.ca jessie/main Translation-en [286 B]
Get:10 https://mirror.its.sfu.ca jessie/main armhf Packages [288 B]
Get:11 https://mirror.its.sfu.ca jessie/main Translation-en_GB [289 B]
Get:12 https://mirror.its.sfu.ca jessie/main Translation-en [286 B]
Get:13 https://mirror.its.sfu.ca jessie/main armhf Packages [288 B]
Get:14 https://mirror.its.sfu.ca jessie/main Translation-en_GB [289 B]
Get:15 https://mirror.its.sfu.ca jessie/main Translation-en [286 B]
Get:16 https://mirror.its.sfu.ca jessie/main armhf Packages [288 B]
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
Ign http://mirrordirector.raspbian.org jessie/main Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en_GB
Err https://mirror.its.sfu.ca jessie/main armhf Packages
HttpError404
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Get:17 https://mirror.its.sfu.ca jessie/main Translation-en_GB [289 B]
Ign https://mirror.its.sfu.ca jessie/main Translation-en_GB
Get:18 https://mirror.its.sfu.ca jessie/main Translation-en [286 B]
Ign https://mirror.its.sfu.ca jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
W: Failed to fetch https://mirror.its.sfu.ca/mirror/ubuntu . f/Packages HttpError404

E: Some index files failed to download. They have been ignored, or old ones used instead.

Attempt to install libiio
One result shown below other packages with same result
pi@raspberrypi:

$ sudo apt-get install libiio0_0.7-1_armhf.deb
Reading package lists. Done
Building dependency tree
Reading state information. Done
E: Unable to locate package libiio0_0.7-1_armhf.deb
E: Couldn’t find any package by regex ‘libiio0_0.7-1_armhf.deb’

Re: Unable to locate package

These aren’t Raspbian repositories, and most of the binaries aren’t for armhf. You may have to build from source: please see https://github.com/analogdevicesinc/libiio and Building on the Linux Host Target for more details.

You should also take that line out of your apt config file.

Источник

Unable to locate package raspberry

So here’s my problem.

I downloaded file Uplink.tgz to my Downloads folder.

However when I check the contents of my downloads folder Uplink.tgz is right there.

Can someone tell me what the deal is?

Re: Unable to locate package

1. When you install packages, you don’t normally include the compression/archiving suffix. Thus, you’re really looking for «uplink».

2. Try doing «apt-cache search uplink» to find out if that is the actual package name.

Re: Unable to locate package

W. H. Heydt wrote: 1. When you install packages, you don’t normally include the compression/archiving suffix. Thus, you’re really looking for «uplink».

2. Try doing «apt-cache search uplink» to find out if that is the actual package name.

Re: Unable to locate package

Formidable Fox wrote: So here’s my problem.

I downloaded file Uplink.tgz to my Downloads folder.

However when I check the contents of my downloads folder Uplink.tgz is right there.

Can someone tell me what the deal is?

Unless you know for certain that what you have downloaded is an installable package, trying to use apt-get tools is probably not appropriate. Once you step away from such packages nothing is certain any more: there should be instructions for installing at the place you obtained the downloaded file.

To try to find your own way forward try:

That should give you a further directory, Uplink. There might be a README or installation instructions in there.

Alternatively, can you provide a weblink to the site which has the resources for the game you are trying to install?

Re: Unable to locate package

Unless you know for certain that what you have downloaded is an installable package, trying to use apt-get tools is probably not appropriate. Once you step away from such packages nothing is certain any more: there should be instructions for installing at the place you obtained the downloaded file.

To try to find your own way forward try:

That should give you a further directory, Uplink. There might be a README or installation instructions in there.

Alternatively, can you provide a weblink to the site which has the resources for the game you are trying to install?

$ cd downloads
bash: cd: downloads: No such file or directory
pi@raspberrypi

Источник

Unable to locate package raspberry

I was trying to install xrdp but I get this error:

I’m not really familiar with linux, so please help me out here. I want to RDP to my rasp pi from windows 10 machine.

Re: Unable to locate package xrdp

I was trying to install xrdp but I get this error:

I’m not really familiar with linux, so please help me out here. I want to RDP to my rasp pi from windows 10 machine.

Re: Unable to locate package xrdp

I was trying to install xrdp but I get this error:

I’m not really familiar with linux, so please help me out here. I want to RDP to my rasp pi from windows 10 machine.

Re: Unable to locate package xrdp

Given the resolution issues with VNC, did anybody find out why xrdp can’t be located ?

Re: Unable to locate package xrdp

OK, I’m going to answer my own question.

Despite having run it no more than 20 minutes ago, I had to run ‘apt-get update’ again before apt would find and install it.

Having installed it, the resolution is good as ever which blows away VNC, and I confirm that I didn’t have to uninstall anything on Stretch.

Re: Unable to locate package xrdp

JohnBeardmore wrote: did anybody find out why xrdp can’t be located ?

who say you need to uninstall anything? last time i tried the install of xrdp just breaks VNC

______________________________
but all what counts is: that you are happy now.

Re: Unable to locate package xrdp

OK, I’m going to answer my own question.

Despite having run it no more than 20 minutes ago, I had to run ‘apt-get update’ again before apt would find and install it.

Having installed it, the resolution is good as ever which blows away VNC, and I confirm that I didn’t have to uninstall anything on Stretch.

Re: Unable to locate package xrdp

Given the resolution issues with VNC, did anybody find out why xrdp can’t be located ?

What resolution issues?

Languages using left-hand whitespace for syntax are ridiculous

DMs sent on https://twitter.com/DougieLawson or LinkedIn will be answered next month.
Fake doctors — are all on my foes list.

The use of crystal balls and mind reading is prohibited.

Re: Unable to locate package xrdp

Good to know there is a way to change the resolution in VNC. A shame it’s not a little more obvious. Maybe it is if you know enough.

But I thihnk I’ll stick with xrdp, not least because its said to work better over low bandwidth links, and some of our clients have very low bandwidth.

Источник

Adblock
detector