Beckhoff — Модульный промышленный ПК на DIN-рейку — CX1020
Наличие
Для уточнения цены нам необходимо связаться с производителем. Отправляйте запрос по почте, через корзину сайта или через форму заявки.
Ответим на Ваш запрос сегодня в течение дня.
Доставка
- транспортной компанией на Ваш выбор
- самовывоз из офиса в Санкт-Петербурге
- бесплатная доставка до терминала “Деловые Линии” в Санкт-Петербурге
Товар в корзине.
Описание
- Модульный промышленный ПК на DIN-рейку
- процессор Intel® Celeron® м ULV, 1 ГГц тактовая частота
- флэш-память: 64 МБ карта Compact Flash
- встроенная память: 256 МБ оперативной памяти DDR (с возможностью расширения до 512 МБ, 1 ГБ)
- Интерфейсы: 2 x RJ45 (внутренний коммутатор), 10/100 Мбит/с
- Диагностические светодиоды: 1 x Power, 2 x LAN Link/Activity, 1 x TC, 1 x Flash-доступ к памяти
- Erweiterungssteckplatz: 1 x Compact-Flash-Typ-I+II-Einschub mit Auswurfmechanik
- Часы: внутренние, с аварийным питанием от батареи (батарея сменная)
- Операционная система: Microsoft Windows CE или Microsoft Windows Embedded Standard
- Управляющее программного обеспечение: среда выполнения TwinCAT PLC Runtime, NC PTP Runtime, NC I Runtime
- Максимальное рассеивание мощности: 11 Вт (включая системные интерфейсы CX1020-N0xx)
- Степень защиты: IP 20
- Рабочая температура / температура хранения: 0 °C … +50 °C/-25 °C … +85 °C
- Вес: приблизительно 550 г
- Размеры (Ш х В х Г): 96 мм x 112 мм x 99 мм
- ‘C’ = подстановочный символ дополнительного системного интерфейса: 0 = с предустановленным CX1020-N000 = 2 x Ethernet RJ45 интерфейсами (внутренний коммутатор) 1 = с предустановленным CX1020-N000 = 2 x Ethernet RJ45 интерфейсами (внутренний коммутатор) + CX1020-N010 = DVI интерфейс и 2 x USB интерфейса
- ‘S’ = подстановочный символ для опции операционной системы: 0 = не установлено никакой операционной системы 1 = предварительно установленная система Microsoft Windows CE 6 2 = с предустановленной Microsoft Windows Embedded Standard 2009 (обязательно наличе карты Compact Flash ≥ 2 Гб)
- ‘T’ = подстановочный символ дополнительных лицензий программного обеспечения TwinCAT 0 = программное обеспечение TwinCAT не установлено 1 = с лицензией TwinCAT PLC 2 2 = с лицензией с TwinCAT NC 2 3 = с лицензией TwinCAT NC 2 Bitte entnehmen Sie der folgenden Tabelle die Bestellnummern für die gültigen Kombinationen.
Заказные данные
| CX1020-0000 | CPU-модуль CX1020, без операционной системы, без TwinCAT |
|---|---|
| CX1020-0010 | CPU-модуль CX1020, Windows CE, без TwinCAT |
| CX1020-0011 | CPU-модуль CX1020, Windows CE, TwinCAT 2 PLC Runtime |
| CX1020-0012 | CPU-модуль CX1020, Windows CE, TwinCAT 2 NC Runtime |
| CX1020-0013 | CPU-модуль CX1020, Windows CE, TwinCAT 2 NC I Runtime |
| CX1020-0100 | CPU-модуль CX1020, DVI/USB, без операционной системы, без TwinCAT |
| CX1020-0110 | CPU-модуль CX1020, DVI/USB, Windows CE, без TwinCAT |
| CX1020-0111 | CPU-модуль CX1020, DVI/USB, Windows CE, TwinCAT 2 PLC Runtime |
| CX1020-0112 | CPU-модуль CX1020, DVI/USB, Windows CE, TwinCAT 2 NC Runtime |
| CX1020-0113 | CPU-модуль CX1020, DVI/USB, Windows CE, TwinCAT 2 NC I Runtime |
| CX1020-0020 | CPU-модуль CX1020, Windows Embedded Standard, без TwinCAT |
| CX1020-0021 | CPU-модуль CX1020, Windows Embedded Standard, TwinCAT 2 PLC Runtime |
| CX1020-0022 | CPU-модуль CX1020, Windows Embedded Standard, TwinCAT 2 NC Runtime |
| CX1020-0023 | CPU-модуль CX1020, Windows Embedded Standard, TwinCAT 2 NC I Runtime |
| CX1020-0120 | CPU-модуль CX1020, DVI/USB, Windows Embedded Standard, без TwinCAT |
| CX1020-0121 | CPU-модуль CX1020, DVI/USB, Windows Embedded Standard, TwinCAT 2 PLC Runtime |
| CX1020-0122 | CPU-модуль CX1020, DVI/USB, Windows Embedded Standard, TwinCAT 2 NC Runtime |
| CX1020-0123 | CPU-модуль CX1020, DVI/USB, Windows Embedded Standard, TwinCAT 2 NC I Runtime |
Опции, аксессуары
| CX1900-0320 | Intel® Celeron® м 1,0 ГГц, 0 Кб кэша L2 (ноль кэш-памяти второго уровня), вместо Intel® 1.0GHz, кэш L2 512 КБ |
|---|---|
| CX1900-0201 | |
| CX1900-0120 | „Aktive Kühlung“: werkseitiger Umbau des CX1020-CPU-Moduls für aktive Kühlung, um flexiblere Einbaulagen zu ermöglichen (siehe Dokumentation). Die aktive Kühlung erfolgt mit einer Lüfterkassette. Diese Option erfordert Использование источника питания типа CX1100-001x. |
| CX1900-0102 |
О компании Beckhoff
Beckhoff Automation GmbH — немецкий производитель оборудования для автоматизации различного класса мощности как в виде системных решений, так и отдельных компонентов.
Компания делает упор на ПК-совместимое оборудование для управления, промышленные ПК, встраиваемые ПК (Embedded-PC), модули ввода-вывода (Busterminals), приводная техника и программное обеспечение для автоматизации. В 2003 году Beckhoff представила на рынке технологию EtherCAT для управления в реальном времени системами по сети Ethernet.
Штаб-квартира Beckhoff находится в городе Ферль на востоке земли Северный Рейн — Вестфалия и объединяет центральные отделы разработки, производства, управления, сбыта, маркетинга, поддержки и сервисного обслуживания.
В концерне работает более 2500 сотрудников по всему миру. Большая часть производства сосредоточена в городе Ферль. . Читать далее.
CX1020 | Embedded PC series
Add page to favorites
Embedded PC with Intel В® Celeron В® M ULV CPU
The basic CX1020 CPU module has a 1 GHz Intel В® CPU. The controller does not require a fan or other rotating components. In addition to the CPU and the chipset, the CX1020 module also contains the main memory, which is available in different sizes. The controller boots from the Compact Flash.
The basic configuration of the CX1020 includes a 128 MB Compact Flash card and two Ethernet RJ45 interfaces. These interfaces are connected to an internal switch and offer a simple option for creating a line topology without the need for additional Ethernet switches. All other CX family components can be connected via the PC/104 interface that is available on both sides. The passive cooling module is included in the scope of supply. The operating system can be Windows Embedded CE 6 or Windows Embedded Standard 2009. The TwinCAT 2 automation software transforms a CX1020 system into a powerful PLC and motion control system that can be operated with or without visualization. In contrast to the CX1010 , the CX1020 can also be used for interpolating axis movements with TwinCAT 2 NC I.
Further system interfaces or fieldbus connections can be added to the basic CPU module. The CPU module requires a CX1100 type power supply module. All CX1500 fieldbus modules and all CX1100 power supplies from the CX series can be used in combination with the CX1020.
The Embedded PC CX1020 is also available as the ordering option CX1900-0320 with zero second level cache. Instead of the 1 GHz processor with 512 kB second level cache (L2), a less expensive variant of the processor without a second level cache (L2 = 0 kB ) is used. Since the CX1900-0320 has the same 855GME chipset as the CX1020, none of the basic characteristics of the CX1020 are changed, apart from the slightly lower CPU power.
CX1020 | Embedded PC series
Add page to favorites
Embedded PC with Intel ® Celeron ® M ULV CPU
The basic CX1020 CPU module has a 1 GHz Intel ® CPU. The controller does not require a fan or other rotating components. In addition to the CPU and the chipset, the CX1020 module also contains the main memory, which is available in different sizes. The controller boots from the Compact Flash.
The basic configuration of the CX1020 includes a 128 MB Compact Flash card and two Ethernet RJ45 interfaces. These interfaces are connected to an internal switch and offer a simple option for creating a line topology without the need for additional Ethernet switches. All other CX family components can be connected via the PC/104 interface that is available on both sides. The passive cooling module is included in the scope of supply. The operating system can be Windows Embedded CE 6 or Windows Embedded Standard 2009. The TwinCAT 2 automation software transforms a CX1020 system into a powerful PLC and motion control system that can be operated with or without visualization. In contrast to the CX1010 , the CX1020 can also be used for interpolating axis movements with TwinCAT 2 NC I.
Further system interfaces or fieldbus connections can be added to the basic CPU module. The CPU module requires a CX1100 type power supply module. All CX1500 fieldbus modules and all CX1100 power supplies from the CX series can be used in combination with the CX1020.
The Embedded PC CX1020 is also available as the ordering option CX1900-0320 with zero second level cache. Instead of the 1 GHz processor with 512 kB second level cache (L2), a less expensive variant of the processor without a second level cache (L2 = 0 kB ) is used. Since the CX1900-0320 has the same 855GME chipset as the CX1020, none of the basic characteristics of the CX1020 are changed, apart from the slightly lower CPU power.
CX1020 | Basic CPU module
Add page to favorites
CX1020 | Basic CPU module
CX1020 | Basic CPU module
The basic CX1020 CPU module has a 1 GHz Intel ® CPU. The controller does not require a fan or other rotating components. In addition to the CPU and the chipset, the CX1020 module also contains the main memory, which is available in different sizes. The controller boots from the Compact Flash.
The basic configuration of the CX1020 includes a 128 MB Compact Flash card and two Ethernet RJ45 interfaces. These interfaces are connected to an internal switch and offer a simple option for creating a line topology without the need for additional Ethernet switches. All other CX family components can be connected via the PC/104 interface that is available on both sides. The passive cooling module is included in the scope of supply. The operating system can be Windows Embedded CE 6 or Windows Embedded Standard 2009. The TwinCAT 2 automation software transforms a CX1020 system into a powerful PLC and motion control system that can be operated with or without visualization. In contrast to the CX1010, the CX1020 can also be used for interpolating axis movements with TwinCAT 2 NC I.
Further system interfaces or fieldbus connections can be added to the basic CPU module. The CPU module requires a CX1100 type power supply module. All CX1500 fieldbus modules and all CX1100 power supplies from the CX series can be used in combination with the CX1020.
The Embedded PC CX1020 is also available as the ordering option CX1900-0320 with zero second level cache. Instead of the 1 GHz processor with 512 kB second level cache (L2), a less expensive variant of the processor without a second level cache (L2 = 0 kB) is used. Since the CX1900-0320 has the same 855GME chipset as the CX1020, none of the basic characteristics of the CX1020 are changed, apart from the slightly lower CPU power.
Product status:
Regular delivery (not recommended for new projects) | recommended alternative: CX2033, CX2043
CX1100-0002 | Power supply units and I/O interfaces for CX1010/CX1020
Add page to favorites
CX1100-0002 | Power supply units and I/O interfaces for CX1010/CX1020
CX1100-0002 | Power supply units and I/O interfaces for CX1010/CX1020
One of four power supply modules can be selected for CX1010/CX1020 systems. The power supply of all other system components is ensured via the internal PC/104 bus; no separate supply lines are required. However, the CX1100 components offer further important characteristics that go beyond a pure power supply: an integrated NOVRAM enables the fail-safe storage of process data, an LC display with two lines of 16 characters each is used for displaying system and user messages. The power supplies of the CX system can be changed in the field.
In addition to the power supply and the three basic functions display, navigation switch and NOVRAM, the CX1100-0002 also offers the I/O connection for Bus Terminals (KLxxxx). The Bus Terminal connection option creates a controller with a highly variable, expandable I/O level with a wide range of signals. The I/O data are stored in a DPRAM that is accessible to the CPU via the system bus.
Product status:
Regular delivery (not recommended for new projects)